Inverters for solar Panel systems
Solar inverters (or grid-tied inverters) are a crucial part of a PV system. Inverters are units located inside your property - preferably in the loft - which convert the direct current (DC) power generated by your photovoltaic panels into alternating current (AC) power that can either be used by appliances or exported back to the grid.
The inverter is the one of few moving parts in a solar PV system, and is therefore one of the only elements which will need replacing during the system’s 25-year lifespan (often after around 10 years). Inverters are generally very efficient, and convert around 95% of the DC input power into AC (the other 5% being used to power the inverter). They maximise electricity production by constantly varying their resistance (load) in a way that ensures that PV panels always operate under optimal conditions for the level of sunlight they receive – this is called maximum power point tracking (MPPT).
Ensuring that your PV installer installs a high quality and well matched inverter is essential, both for maximum system efficiency and in order to keep replacement costs to a minimum.
Some inverters will allow you to monitor the total output of your array, although dedicated PV system monitoring units are also available.
Most inverters installed in PV systems are ‘string inverters’, and are suitable for arrays of which all the panels operate under the same conditions (inclination, shading, etc.). One string inverter is sufficient for an entire array of PV panels.
‘Micro inverters’ are useful when the panels of an array operate in varying light conditions; they are attached directly to the panels and allow for the monitoring of each individual panel. One of the main benefits of micro inverters is that if one inverter or panel becomes faulty, the other panels will still be able to function normally. The same applies if one panel is dirty or shaded - the others will continue to function optimally. Micro inverters also tend to have a longer lifespan than string inverters but have the price tag to match.
As micro inverters are installed directly onto the PV panel, means that a repair might incur increased labour costs, along with the cost of any scaffolding that may be required to access them. As previously noted, since there are still relatively few micro inverter manufacturers, their cost is also much higher than that of a single string inverter.